Besides basic test results, does the RepairSolutionsPRO® app give detailed insights and repair tips based on the battery condition?

Yes. After each test, the RepairSolutionsPRO ® app displays a battery condition verdict — for example, Good Battery, Charge & Retest, Replace Battery — along with repair tips based on the battery condition, so you can quickly decide whether the battery needs to be recharged or replaced.

Can the Battery Tester Module test deep-cycle or marine batteries?

No. The Battery Tester Module is designed for vehicle starting batteries — deep-cycle and marine batteries are not supported.

Can I use the Out-of-Vehicle Test while the battery is still connected to the car?

No. The Out-of-Vehicle Test requires the battery to be completely disconnected from the vehicle’s electrical system. The battery does not have to be physically removed from the vehicle — it can remain in place as long as both terminals are disconnected, or it can be tested on a workbench. If the battery is still connected to the vehicle, use the In-Vehicle Test instead. Before handling the battery, follow the safety precautions in the user manual.

What types of batteries can the Battery Tester Module test?

The Battery Tester Module tests 12-volt automotive starting batteries. BA200 supports Flooded (lead-acid) and AGM (Absorbent Glass Mat) batteries, as well as GEL cell batteries.

What is the highest Cold Cranking Amps (CCA) rating the Battery Tester Module can handle?

The Battery Tester Module supports batteries rated up to 2000 Cold Cranking Amps (CCA).

How do I set up a Bluetooth connection between the Battery Tester Module and the RepairSolutionsPRO® app on my device?

The Battery Tester Module connects wirelessly using Bluetooth Low Energy (BLE). First, attach the module to the battery. Then open the RepairSolutionsPRO ® app and go to Tool Pairing. The first time you use the module, select “Add Tool” to pair it. After that, the app remembers the module and will connect automatically whenever the module is attached to a battery and the app is open. If you experience connection issues, make sure the Battery Tester Module is near your mobile device. Keeping the devices too far apart may weaken the signal and cause a poor or unstable connection.

How can I easily view, organize, and manage my test reports in the RepairSolutionsPRO® app? Can I export data in different formats, print reports, or connect the test results with my shop management system?

Your battery test results are automatically saved to your RepairSolutionsPRO ® account, so you can view your test history at any time from either the RepairSolutionsPRO ® mobile app or the RepairSolutionsPRO ® website. You can share reports directly from the app or the website, such as via email. PDF is currently the supported export format, which makes it easy to print reports or attach them to your shop records.

Can the Battery Tester Module work with smart charging systems that use variable voltage and multi-stage charging?

No. Per the product specifications, do not perform testing on vehicles equipped with a Smart Charging System.

Can the Battery Tester Module test high-voltage batteries in Hybrid/Electric vehicles (HEVs)?

No. The Battery Tester Module is designed for 12-volt lead-acid batteries in conventional vehicles only. Per the product specifications, do not use it on Hybrid or Electric vehicles.

BA200 Bluetooth Battery Tester: Cranking & Charging

Name: INNOVAPRO BA200 Battery Tester Module
Brand: INNOVAPRO
SKU: BA200

INNOVAPRO BA200 Bluetooth battery tester module next to smartphone displaying battery health check results on RepairSolutionsPRO app

INNOVAPRO BA200 wireless battery tester module kit with protective carrying case and quick start guide card

Front view of INNOVAPRO BA200 compact wireless battery diagnostic tester with connected copper-plated alligator clamps

RepairSolutionsPRO app screens and battery diagnostic PDF report showing state of health charts

RepairSolutionsPRO app battery test report screen showing state of health and cranking results for the INNOVAPRO BA200

BA200: Battery Tester Module

Powered by RepairSolutionsPRO^®

This compact Battery Tester Module provides comprehensive diagnostics — in-vehicle and out-of-vehicle battery health checks, plus starter, charging, and full electrical system tests. Built for professional technicians, it connects via Bluetooth with the RepairSolutionsPRO^® app or the 7111 SDS Pro for guided testing, clear results, and repair tips. Every test is saved as a report in the RSPRO^® app or web portal — review, email, and share customer test history anytime.

Features & Specifications

Features

Compatible with RepairSolutionsPRO^®

The BA200 pairs via Bluetooth with the RSPRO^® app or 7111 SDS Pro to run all battery tests, view results, get repair tips, and generate reports.

Battery Health Check/ In-Vehicle Test

Tests the battery right on the vehicle. Evaluates SOH/SOC under real vehicle loads, delivering 4 clear results — Good, Recharge, Retest, Replace.

Battery Health Check/ Out-of-Vehicle Test

Tests a bench or uninstalled battery with no vehicle-load interference. Verifies cold cranking capacity, terminal voltage, and internal resistance.

Starter System Test

Evaluates the starter system by measuring cranking voltage, drop voltage, and starting time, identifying Cranking Normal, Charge Battery, Low Voltage, or No Start conditions.*Do not perform on Smart Alternator, Hybrid, or Electric vehicles.

Charging System Analysis

Analyzes alternator output voltage and AC ripple across loaded/no-load and idle/high-rev conditions to detect Output Too Low, Output Too High, Excessive Ripple, or No Output faults.*Do not perform on Smart Alternator, Hybrid, or Electric vehicles.

Electrical System Test

A guided 3-step sequence — Battery Health Check, Starter System Test, and Charging System Analysis for a complete electrical system assessment.*Do not perform on Smart Alternator, Hybrid, or Electric vehicles.

Voltmeter (12V)

Functions like a DMM, continuously measuring the vehicle's battery DC voltage.

Cranking Voltage Graph View

Displays a cranking voltage graph after the test to pinpoint voltage dips during starter cranking.

LED Indicator Status

Flashing red LED shows the module is powered on.
Solid green shows it's connected to the RSPRO^® app.

Battery Temperature

Reads battery temperature during testing.

History Report

Stores test reports in the RSPRO^® app to review, email, share, or edit anytime. View sample report

Operating Voltage Range

Operates across a 6V–24V DC input range to test batteries and electrical systems.

CCA Range

Tests batteries rated from 100 to 2000 CCA across passenger cars, SUVs, and light trucks.

Battery Type

Supports testing across Flooded, AGM, and GEL battery types.

Battery Compatibility

Tests 12V lead-acid automotive batteries across Flooded, AGM, and GEL types.

Application

Works with passenger cars, SUVs, and light trucks.

Specifications

Connectivity

Wireless: Bluetooth (RSPRO^® App/ 7111)

Cable

DB15 Detachable Battery Cable

Operating Temperature

23ºF to 122ºF (-5ºC to 50ºC)

Memory

4 MB

Dimension (L x W x H)

120 x 65 x 28 (mm)

Product Includes

INNOVAPRO BA200 Battery Tester Module

Quick Start Guide

RSPRO^® Pouch

DB15 Detachable Battery Cable

Get More Information From Our Videos

View All Videos

Product Walkthrough

Introduction

INNOVA BA200 FAQs

Besides basic test results, does the RepairSolutionsPRO® app give detailed insights and repair tips based on the battery condition?

Yes. After each test, the RepairSolutionsPRO^® app displays a battery condition verdict — for example, Good Battery, Charge & Retest, Replace Battery — along with repair tips based on the battery condition, so you can quickly decide whether the battery needs to be recharged or replaced.
Can the Battery Tester Module test deep-cycle or marine batteries?

No. The Battery Tester Module is designed for vehicle starting batteries — deep-cycle and marine batteries are not supported.
Can I use the Out-of-Vehicle Test while the battery is still connected to the car?

No. The Out-of-Vehicle Test requires the battery to be completely disconnected from the vehicle’s electrical system. The battery does not have to be physically removed from the vehicle — it can remain in place as long as both terminals are disconnected, or it can be tested on a workbench. If the battery is still connected to the vehicle, use the In-Vehicle Test instead. Before handling the battery, follow the safety precautions in the user manual.
What types of batteries can the Battery Tester Module test?

The Battery Tester Module tests 12-volt automotive starting batteries. BA200 supports Flooded (lead-acid) and AGM (Absorbent Glass Mat) batteries, as well as GEL cell batteries.
What is the highest Cold Cranking Amps (CCA) rating the Battery Tester Module can handle?

The Battery Tester Module supports batteries rated up to 2000 Cold Cranking Amps (CCA).
How do I set up a Bluetooth connection between the Battery Tester Module and the RepairSolutionsPRO® app on my device?

The Battery Tester Module connects wirelessly using Bluetooth Low Energy (BLE). First, attach the module to the battery. Then open the RepairSolutionsPRO^® app and go to Tool Pairing. The first time you use the module, select “Add Tool” to pair it. After that, the app remembers the module and will connect automatically whenever the module is attached to a battery and the app is open. If you experience connection issues, make sure the Battery Tester Module is near your mobile device. Keeping the devices too far apart may weaken the signal and cause a poor or unstable connection.
How can I easily view, organize, and manage my test reports in the RepairSolutionsPRO® app? Can I export data in different formats, print reports, or connect the test results with my shop management system?

Your battery test results are automatically saved to your RepairSolutionsPRO^® account, so you can view your test history at any time from either the RepairSolutionsPRO^® mobile app or the RepairSolutionsPRO^® website. You can share reports directly from the app or the website, such as via email. PDF is currently the supported export format, which makes it easy to print reports or attach them to your shop records.
Can the Battery Tester Module work with smart charging systems that use variable voltage and multi-stage charging?

No. Per the product specifications, do not perform testing on vehicles equipped with a Smart Charging System.
Can the Battery Tester Module test high-voltage batteries in Hybrid/Electric vehicles (HEVs)?

No. The Battery Tester Module is designed for 12-volt lead-acid batteries in conventional vehicles only. Per the product specifications, do not use it on Hybrid or Electric vehicles.

SUPPORT ARTICLES

For tool updates, go to Updates/Manuals page or Support for assistance.

Access Your Reports on the App and Web Portal

Sign in to the RSPRO^® app or web portal from any device to open scan reports, track vehicle history, and share findings with customers or other technicians.

You can find

on mobile or sign in to the web portal.

SIGN IN ON THE Web Portal