Introduction
Description: To guide users on how to use the Special Functions while using the Innova 7111 Smart Diagnostic System (SDS) tablet scan tool.
Benefits: The Special Functions is the most important and professional feature of the Innova 7111. This function makes the vehicle components, and the control module synchronizes together after repairing or replacing; resets the control module or performs the vital function affecting the vehicle's operation. The Innova 7111 also provides Special Functions features for many systems on the vehicle, but this article shows the way to perform the Engine Control Module (ECM) Special Functions features.
Instructions
Note: This procedure is carried out on the 2019 Hyundai Accent.
Step 1: Connect the Innova 7111 to the vehicle via the 16-pin Data Link Connector (DLC). Wait a moment for the AUTO-LINK process to be completed.
After retrieving, the Innova 7111 gets general information such as VIN, vehicle information, and odometer. Next, select the OEM Diagnostics section.
Step 2: Based on the vehicle information, the Innova 7111 shows you the list of systems supported in this vehicle. Next, find and select the ECM – Engine Control Module system.
Note: The system name ECM – Engine Control Module might be different from vehicle to vehicle.
Step 3: After linking to the ECM, the Innova 7111 shows a list of Diagnostic functions: Read DTCs, Erase DTCs, Live Data, Actuator Test, Special Test, and ECU Information. Select the Special Functions feature to go to the next step.
Step 4: In the Special Functions feature, the Innova 7111 shows you the list of functions which supported. Next, select the desired functions to perform. In this example, here is the Evap. Leakage Test function.
Note: The list of functions differs from vehicle to vehicle.
Step 5: The Innova 7111 starts to communicate with the vehicle and shows the conditions required before performing the function. Ensure the vehicle’s condition matches the conditions shown on the tablet scan tool and press the OK button to go to the next step.
Step 6: The Innova 7111 automatically communicates with ECM and starts to perform the Evap.Leakage Test.
Step 7: After communicating between ECM and vehicle, the Innova 7111 shows the result on the screen. Press the OK button to finish the function.
Related Articles
- Innova 7111: How to check the Freeze Frame data
- Innova 7111: How to Scan All System on your vehicle
- Innova 7111: How to perform the Steering Angle Sensor Calibration function
